1- Ligar o pc ao receptor através do cabo serie e de um cabo de rede crossover
2- Ter o receptor desligado da corrente
3- Iniciar Dm-800repair
4- Iniciar DreamUP_patched_by_forhike_and_natas
5 - Clicar em dm800 repair center e proceder como se estivéssemos a usar o dream up, vai correr a barra de progesso e no final ja vai aparecer o ip da box no ecra.
6- a partir de agora ou continuar com o mesmo programa ou usar o flash wizard.
7- Box recuperada.lVer anexo DM800_repair.zip
______________________________________________________________________________
o texto original é este.
"""Connect PC and receiver with serial cable and a crossover network cable nullmodem
if decoder direct PC-to-pin or pins if using a router or switch
a decoder off
Start DM800-repair
start DreamUP_patched_by_forhike_and_natas
click on the DM800-repair center and proceed as a normal dreamUp
that is, click connect and power the decoder
at the end you will see the progress bar as if by magic on the display of the decoders' recive IP,
at this point or continue with the same or Flashwizard DreamUp (I used Flashwizard) """
2- Ter o receptor desligado da corrente
3- Iniciar Dm-800repair
4- Iniciar DreamUP_patched_by_forhike_and_natas
5 - Clicar em dm800 repair center e proceder como se estivéssemos a usar o dream up, vai correr a barra de progesso e no final ja vai aparecer o ip da box no ecra.
6- a partir de agora ou continuar com o mesmo programa ou usar o flash wizard.
7- Box recuperada.lVer anexo DM800_repair.zip
______________________________________________________________________________
o texto original é este.
"""Connect PC and receiver with serial cable and a crossover network cable nullmodem
if decoder direct PC-to-pin or pins if using a router or switch
a decoder off
Start DM800-repair
start DreamUP_patched_by_forhike_and_natas
click on the DM800-repair center and proceed as a normal dreamUp
that is, click connect and power the decoder
at the end you will see the progress bar as if by magic on the display of the decoders' recive IP,
at this point or continue with the same or Flashwizard DreamUp (I used Flashwizard) """